Your cart is currently empty!.
You may check out all the available products and buy some in the shop.
Continue Shopping-
Dynacord Sub-2.18 Dual 18-Inch 1000W 4000W Peak Subwoofer
25,512.95 AEDThe Sub 2.18 is a powerful double 18-inch subwoofer designed for high sound pressure levels with a sensitivity of 102 dB 1W/1m and a maximum SPL of 138 dB. It delivers 1000W continuous and 4000W peak power handling, making it versatile for use in two-way or three-way systems. Ideal for pairing with the C 25.2 in an active two-way setup, the Sub 2.18 is compatible with DYNACORD DSP controllers or amplifiers. It also supports the optional DC-WK-C18 wheel kit for easier transport.
-
Dynacord Sub-1.18 18-Inch 500W Subwoofer with 130 dB SPL
15,298.53 AEDThe Sub 1.18 is a high-performance bass extension for Corus C 12.2 or C 15.2 cabinets, featuring an Electro-Voice EVS-18S woofer for low-frequency output between 38 Hz and 250 Hz, achieving a maximum SPL of 130 dB. It includes a low-pass filter for easy parallel mode operation with existing full-range cabinets and is compatible with DYNACORD DSP controllers or amplifiers for active two-way systems.
-
Dynacord C-15.2 15-Inch 500W 2-Way Full Range Speaker
2,943.13 AEDThe DYNACORD C 15.2 is a compact, trapezoidal 15" two-way full-range speaker with a power handling capability of 500W continuous and 2000W peak. It features an SMX 2151 woofer, a DH3 compression driver on a 90° x 50° constant directivity horn, and achieves a sensitivity of 100 dB 1W/1m. Suitable for applications needing extended low-end sound, it includes flying points for versatile mounting orientations and is compatible with the DC-MBC15-UMH bracket for use with the DYNACORD PI-Easy system.
-
Dynacord C-12.2 12-Inch 500W 2-Way Full Range Speaker
2,923.21 AEDThe C 12.2 is a compact, trapezoidal 12-inch 2-way full-range speaker with high power handling (500W continuous / 2000W peak) and 97 dB sensitivity. It features an SMX 2120 woofer for low frequencies and a DH3 compression driver with a 90° x 50° constant directivity horn for frequencies above 1650 Hz. Equipped with flying points for vertical or horizontal mounting, it is compatible with the DC-MBC12-UMH bracket for versatile orientation using the DYNACORD PI-Easy system. For enhanced low bass, pairing with a Sub 1.15 is recommended.
-
Dynacord MXE5 Audio Matrix Mix Engine 24×24 with Dante Networking
19,311.51 AEDThe MXE5, part of the MXE matrix mix engine series, features a 24 x 24 crosspoint audio matrix for routing and mixing, including 12 analog mic/line inputs, eight line outputs, and 24 Dante audio channels. It also acts as a communication hub for IP peripherals, managing system-wide commands effectively.
-
Dynacord L2800FD L-Series FIR-Drive Power Amplifier 2800W DSP
6,475.29 AEDThe Dynacord L2800FD amplifier features SpeakOn connectors, high-quality components, and advanced DSP with multi-band PEQs, crossovers, limiters, and delay per channel, along with true channel grouping control, PEQ, GEQ, and delay for each group. It includes a power cord and USB cable.
-
Dynacord A-118 18-Inch 400W Powered Subwoofer for Superior Bass
4,649.28 AEDThe A-Line loudspeakers are distinguished by their high-quality components and impressive power-handling capabilities, featuring 15mm-thick plywood cabinets that combine lightness with durability. Their asymmetrical design also makes them ideal for use as floor monitors.
-
Dynacord D-12 12-Inch 300W 2-Way Speaker Black
3,247.91 AEDThis professional passive 2-way loudspeaker features a 12″ woofer and 1″ tweeter, delivering 300W RMS power with a maximum SPL of 129dB. It operates within a frequency range of 70Hz to 18kHz and has an impedance of 8 Ohms. The built-in tripod nest and sleek black design enhance its versatility and aesthetic appeal. Made in Germany.
-
Dynacord Stereo Power Amplifier SL-2400 1200W 2-Channel
7,661.91 AEDThe Professional Class H power amplifier offers 2x 1200W output at 4 Ohms, suitable for both fixed and mobile applications. It features an LPN filter for dynamic kick, a built-in limiter, and comprehensive protection. The device boasts active cooling with three front-to-back fans.
-
Dynacord Stereo Power Amplifier SL-1800 2x800W 4 Ohm Class H
6,156.37 AEDThis Professional Class H power amplifier delivers 2x 800W at 4 Ohms, suitable for fixed and mobile applications, featuring an LPN filter for dynamic response, a limiter, comprehensive protection, and active cooling with three front-to-back fans.
-
Dynacord Stereo Power Amplifier SL 1200 1200W with LPN Filter
5,075.31 AEDThe SL 1200 amplifier delivers consistent high-power output and high efficiency, making it suitable for various mobile and club audio systems. Equipped with a comprehensive protection package and dynamic limiters, it ensures reliable performance at high levels.
-
Dynacord L1800FD DSP Power Amplifier 2x850W Class AB for Touring
5,342.56 AEDThe Dynacord L1800FD DSP is a Class AB amplifier with DSP processing for touring applications, offering stable operation up to a 2-ohm load. Features include LPN filter technology, FIRdrive filters, load impedance monitoring, and protective limiters. It provides continuous power of 2x 1400W at 2 ohms, 2x 850W at 4 ohms, and 2x 450W at 8 ohms. The amplifier has balanced XLR inputs and Neutrik SpeakOn outputs. Dimensions: 483 x 88 x 462.4 mm; weight: 16.2 kg.