-
Neumann TLM 102 Large-Diaphragm Cardioid Condenser Mic – Nickel
2,745.75 AEDThe Neumann TLM-102 Large-Diaphragm Cardioid Studio Condenser Microphone, styled in a nickel finish, excels in recording both high and low sound pressure levels. With its capacity for handling percussion, drums, and amplifiers, it maintains minimal coloration for a clear bass range and enhanced vocal presence. Features include a high SPL rating, fast transient response, elastic capsule suspension to reduce noise, and an integrated pop screen for plosive suppression.
-
Neumann Large-Diaphragm Condenser Microphone TLM-102 Studio Set – Black Cardioid High SPL
3,213.00 AEDThe Neumann TLM-102 Large-Diaphragm Cardioid Studio Condenser Microphone, styled in a black finish, is designed to handle very high sound pressure levels, making it suitable for recording loud sources like drums and amplifiers while also excelling at capturing vocals and speech. Its frequency response includes a slight boost above 6 kHz for enhanced vocal presence, with linearity below 6 kHz for clear bass. Features include an elastic-suspended capsule to minimize noise, an integrated pop screen, transformerless circuitry, and a compact design.
-
Neumann KMS 104 Cardioid Condenser Microphone – Black, 20Hz-20kHz
2,536.72 AEDThe black fet100 Series KMS 104 Cardioid Condenser Vocalist Microphone by Neumann is designed for close-range vocal and instrumental performances. It features a condenser capsule with a cardioid pattern that minimizes rear sound interference, a wide frequency response of 20 Hz to 20 kHz, and low self-noise suitable for in-ear monitoring. It includes a balanced, transformerless output, pop-sound protection, a SG105 Stand Clamp, and a padded nylon bag.
-
Neumann KMS 105 Condenser Microphone Supercardioid 150 dB Black Live Stage
2,841.00 AEDThe Neumann KMS 105 black microphone is designed for live stage performances, offering high acoustic resolution and a smooth frequency response to provide musicians with optimal control. Its supercardioid capsule effectively suppresses rear sounds, making it ideal for in-ear monitoring with low self-noise and color-free crosstalk.
-
Neumann V 402 2-Channel Microphone Preamplifier with 60 dB Gain Rackmount
10,519.74 AEDThe Neumann V 402 is a meticulously crafted 2-channel rackmount preamplifier with transformerless circuitry for transparent sound, offering up to 60 dB of gain, -20 dB pads, 60 Hz high-pass filters, and a studio-grade headphone amp for precise monitoring. Ideal for both microphones and Hi-Z instruments, it ensures pristine signal integrity.
-
Neumann NDH 20 Closed-Back Headphones with 38mm Drivers and 5-30 kHz Range
1,958.25 AEDThe Neumann NDH 20 Headphones are engineered for tracking, mixing, and critical listening with a closed-back, circumaural design. Featuring 38mm drivers with high-gauss neodymium magnets, these headphones deliver accurate sound without distortion or color, offering a frequency response of 5 Hz to 30 kHz. They are crafted to minimize midrange resonances for precise mixing, providing a sonic experience akin to Neumann’s studio loudspeakers.
-
QSC Rear Rack Ear Kit 7 inch for 2 RU 3 RU Power Amplifiers
561.75 AEDThe QSC Rear Rack Ear Support Kit includes two 7-inch L-brackets and mounting hardware designed for securing 2 RU and 3 RU power amplifiers.
-
QSC GXD4 Class-D Power Amplifier with DSP, 1600W Peak, 2 Channels
3,451.35 AEDThe GXD 4 from QSC is a lightweight (11.3 lbs) power amplifier designed for professional PA systems, supporting speakers with 4 and 8 ohm loads and delivering up to 1600W output. It features a class D output stage, a universal power supply, and an integrated DSP with High and Low-Pass filters, a 4-band parametric EQ, signal alignment delay, and RMS/Peak protection limiting. Connectivity options include parallel XLR and 1/4″ TRS inputs with loop-through, as well as professional binding posts and NL4 connectors. The unit also provides smart speaker protection settings based on output and impedance, and includes a standard IEC power cord.
-
QSC SP-36 Threaded Speaker Pole, 35mm Diameter, 36 inch Length, M20 Thread
241.50 AEDThe SP-36 by QSC is a 35mm diameter, 36" long speaker pole engineered to securely support two KLA line-array enclosures atop a KLA181 subwoofer, featuring a stable M20 threaded end compatible with the KLA181.
-
QSC Speaker Pole SP-26 26-inch M20 Thread for K8.2 and KS118 Compatibility
196.35 AEDThe 26" SP-26 Loudspeaker Pole by QSC is engineered to securely mount a QSC K8.2 speaker on top of a KS118 subwoofer, with a male M20 thread and a 1-3/8" diameter, supporting other compatible speaker configurations (both sold separately).
-
QSC Speaker Pole Extension SP-16X, 16 inch, 35mm Diameter, M20 Thread
159.00 AEDThe SP-16X loudspeaker extension pole is a robust, black-painted metal pole measuring 16 inches (406 mm) in length with a 35 mm diameter. It features a male M20 thread on one end and a female M20 thread on the other, ensuring straightforward installation with QSC KS Series devices. The male-threaded end fits securely into a subwoofer's female-threaded socket, while the top end supports the attachment of another extension pole or main loudspeaker, making it versatile for a variety of audio setups.
-
QSC M10 Forged Steel Eyebolt Kit-C for K, KLA, K.2, AcousticDesign Series
324.45 AEDThe QSC M10 Forged-Shoulder Steel Eyebolt Kit enables suspension mounting for AcousticDesign, KLA, K, and K.2 series loudspeakers, including three M10 shoulder eyebolts and three M10 black conical spring washers for straightforward installation.














